Sharp Aluminium Oxide Grain with Optimized Bond:Norton’s cutting discs sharp aluminium oxide grain is carefully bonded to enhance cutting efficienc...

Dual Nylon banding tool used to tighten banding and also cut off excess banding 

The TRSL Offset Ruler comes in two variations: 85mm offset & 125mm offset. The 85mm rule works hand-in-hand with the Bosch GPL 5-Point Laser, m...

Supplied in packs of 12 Paint-Riter® Valve Action® is a fast-drying liquid paint marker that provides long-lasting, wear- and weather-resistant mar...

Supplied in packs of 12. Paint-Riter®+ Oily Surface is a liquid paint marker developed for superior marking performance on oily and greasy surfaces...

Der Bleistift, der nie angespitzt werden muss. Drehen Sie einfach die Basis dieses Bleistifts und schieben Sie die Mine für eine gleichmäßig scharf...

PADS no.: 0040/017651. Track deterioration begins from the moment the track is laid. Measuring the level of deterioration under normal traffic cond...

The plates enable the associated points to be identified. Normally fixed upon the sleepers adjacent to the point ends to which they refer, as set o...

HW Points Machine Crank Handle, a railway tool for manually turning points during servicing.

Order your site PPE signage pack today! Made from either 1mm Rigid PVC or 3mm Foamex!

The mats are L = 1280mm, W = 580No Go 300       Highest point 300mm, lowest 165mm         Weight approx. 50kgNo Go 160       Highest point 160mm, l...

Our ProSolve Sitemarker is a cost-effective and versatile aerosol line marking paint. Its quick-drying and durable formulation (lead and xylene-...

The PS-HDL6R is a dual powered LED head torch, powered by the included USB type-C rechargeable lithium battery or can be run on 3 AAA’s using the i...

  Rail Tongs manufactured from forged steel. Designed to accommodate a range of rail sections. Hi-Vis Yellow 0057/050092

  Constructed from durable steel  Use on BS113A, UIC 60, S46 & S54 Rail Section Length - 1.4 meters 0039/002019

Einzel- / Doppelpfeilplatten werden an Stellen platziert, an denen sich die Geometriemessung ändert. Sie werden neben Überhöhungsplatten verwendet...

Nummerierte Überhöhungsplatten werden verwendet, um die Überhöhungsmenge an dem gegebenen Punkt auf der Strecke darzustellen, und sie sind an der ...

Geometrieplatten sind in der Mitte der Schwelle befestigt und werden verwendet, um die Geometriemessung an diesem Punkt auf der Strecke darzustell...